How do you sand down a nightstand? In fact, it isn’t that hard. You don’t need any special tools or supplies, either. Here’s what you need:
One long (and preferably heavy) object to make the sanding with. This can be a wooden block or an empty wood plank. It needs to be large enough to hold the entire table top in its lap. Avoid using too big a block or a big wooden piece as you may smash it into pieces if you try to lift it.
Some fine sandpaper, a chisel, some nail polish and some dark, oil-based stain are other things that you will need. Start by getting the shabby chic look going by rubbing some of the stain into the surface with your chisel. You will find that this produces a rich texture that is reminiscent of aged wood. The oil creates a slight shine that gives the surface a worn and weathered appearance. Sand down the shabby chic material lightly until you get the grain of the wood. Then wipe it down with a slightly damp piece of cotton cloth.
Next, get out some of your stained wood stain. Try to match the shade of the stain to the shade of the nightstand (even the shade of the frame or countertops will be affected by the stain). Apply it evenly to the shabby chic surface. If some of the stain gets on the furniture or the flooring, work it out immediately with a small brush. If it doesn’t come off, wait a few hours and try again.
When the stain has completely dried, apply some of that wax that you saved from earlier. This will seal the material and make it easier for you to clean it. Leave that wax on the shabby chic material for at least three or four days. If possible, it is a good idea to allow it to fully cure for a few months before using it.
If the shabby chic desk is painted, now would be a good time to remove the paint. While you are at it, get rid of any scuff marks from the floor. Take off any hardware too. Once everything is completely clean and you’ve accomplished that step, you can start on how do you sand down a nightstand? The best way to go about this task is to work from the wall farthest from the window.
There is an easy way to accomplish this. Instead of using your hand, use an electric sander. This will ensure that your shabby chic furniture gets evenly sanded. It also makes it a lot easier since you won’t have to deal with measuring and doing the polishing of the wood. You will just need to move the sander back and forth in order to get even strokes.
The shabby chic desk can really turn your living room into a cozy little nook to yourself. Make sure that you look into this option. It’s very affordable, unlike most other furnishings out there. What more could you ask for?
This is going to be one of the most important decisions you make with shabby chic furniture. If you are looking for a little extra style, then go for an elaborate design. The downside of this is that it can make the overall piece heavier than it needs to be. If you aren’t planning on moving around much, then this is a good option. Just make sure that you take the time to learn how to lift it.
The next step in how do you sand down a nightstand? If you are looking to save money, then you don’t have to. You can go with either metal or wood and just sand down the front. Both materials will look amazing and they will last longer.
However, metal can be scratched if not properly protected. Also, if you want to save even more money, then you can purchase a glass cleaner and use it on the surface as well. Sanding through glass can actually damage the item so using a solution like this is highly recommended.
So how do you sand down a nightstand? It’s a simple process as long as you have the proper tools. The most important thing that you need to remember is that you don’t want to end up with scratches on the surface. For that reason, you should always test the solution on a small area before using it on the entire piece. This will help to ensure that you don’t ruin your furniture when you try to do something that you may be unable to handle.